Return-Path: <13brv3@bellsouth.net> Received: from imf17aec.mail.bellsouth.net ([205.152.59.65] verified) by logan.com (CommuniGate Pro SMTP 4.1.8) with ESMTP id 2918161 for flyrotary@lancaironline.net; Mon, 05 Jan 2004 14:17:06 -0500 Received: from rad ([68.155.99.73]) by imf17aec.mail.bellsouth.net (InterMail vM.5.01.06.05 201-253-122-130-105-20030824) with ESMTP id <20040105191702.FZBG20306.imf17aec.mail.bellsouth.net@rad> for ; Mon, 5 Jan 2004 14:17:02 -0500 From: "Russell Duffy" <13brv3@bellsouth.net> To: "Flyrotary List" Subject: exhaust heat shield Date: Mon, 5 Jan 2004 13:17:03 -0600 Message-ID: <001f01c3d3c0$80a19300$6001a8c0@rad> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0020_01C3D38E.36072300" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.4510 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 Importance: Normal This is a multi-part message in MIME format. ------=_NextPart_000_0020_01C3D38E.36072300 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable Greetings, =20 I'm looking into the best methods for heat shielding around the exhaust pipes. I'll be squeezing pipes between the engine mount tube, and cowl, with just less than an inch to clear on either side. The closest = clearance will be about 12"-14" from the exhaust port, so it will still be pretty = hot. =20 In the previous messages about turbo heat shielding, I learned that some folks are using aluminum foil, or the commercial temp shielding on the inside of their cowls with good results. How close are your pipes to = the cowl? Will simple aluminum foil protect the cowl from the exhaust pipe = just an inch away?=20 =20 How about the mount tube? I had the stock turbo shield on the rev-1 = setup, and there was about an inch or so of clearance from the heat shield, to = the motor mount tube. I also wrapped the mount tube with fire sleeve. When = I took it all apart, the fire sleeve appeared undamaged on the outside, = but the inside was burnt, as was the paint on the mount tube. I'm wondering = if it wouldn't have been better without the fire sleeve, so it would have = had some airflow. I've seen the silver heat tape, that can be used to wrap = the mount. Will this type of material be sufficient? =20 =20 Thanks, Rusty (Great alcohol report Jim) =20 ------=_NextPart_000_0020_01C3D38E.36072300 Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable Message
Greetings,
 
I'm looking = into the best=20 methods for heat shielding around the exhaust pipes.  I'll be = squeezing=20 pipes between the engine mount tube, and cowl, with just less than an = inch to=20 clear on either side.   The closest clearance will be = about=20 12"-14" from the exhaust port, so it will still be pretty=20 hot. 
 
In the previous = messages=20 about turbo heat shielding, I learned that some folks are using = aluminum=20 foil, or the commercial temp shielding on the inside of their = cowls=20 with good results.  How close are your pipes to the=20 cowl?  Will simple aluminum foil protect the cowl from = the=20 exhaust pipe just an inch away? 
 
How about the = mount=20 tube?  I had the stock turbo shield on the rev-1 setup, and there = was about=20 an inch or so of clearance from the heat shield, to the motor mount = tube.  I also wrapped the mount tube with fire sleeve.  When I = took it=20 all apart, the fire sleeve appeared undamaged on the outside, but the = inside was=20 burnt, as was the paint on the mount tube. =20 I'm wondering if it wouldn't have been better without the fire sleeve, = so it=20 would have had some airflow.  I've seen the silver heat tape, = that can=20 be used to wrap the mount.  Will this type of material be = sufficient? =20
 
Thanks,
Rusty (Great = alcohol report=20 Jim) 
------=_NextPart_000_0020_01C3D38E.36072300--