|
First of all, that is an oil-IN fitting. Oil out is on the other end of the
engine.
I don't have a Conversion concepts mount, so can't help you with the
interference solution.
Bill Schertz
KIS Cruiser #4045
N343BS
Phase I testing
Sent: Monday, February 15, 2010 8:23 AM
Subject: [FlyRotary] CC mounting clearance issue
I have been mulling over options for a few years now but it is
getting closer to the time to start coming up with a strategy to deal with the
clearance issue on the right front side of my Conversion Concepts 13B
mount. As is came, there is a clearance issue due to oil
out (?) fitting; so I'm wondering what some of you who
have "gone before" did to address this issue.
Thanks for any ideas.
Doug Lomheim
9A; 13B; electrical now; FWF soon
--
Homepage: http://www.flyrotary.com/
Archive and
UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html
|