|
Message
I agree, Dawley Stainless
is pretty good.
Thanks Todd. So here's another question- I've got
an exhaust pipe expander, that appears to be made to expand one pipe, so the
next will fit inside. Do you think this will work with .035 wall SS
tube? I'm still trying to figure out the best way to arrange pre-bent
pieces, and join them together.
I spent some time yesterday looking at tubing
benders. I thought I had found a reasonably affordable machine that would
do 1.75" tube. Unfortunately, it requires a minimum of about .9" wall
tubing, to make a 7" radius bend. In talking to a sales guy, I got a real
education on why you absolutely have to have a mandrel bender (HUGE $$$) to make
tight bends in thin wall tubing. Needless to say, I'll be buying pre-bent
sections and sticking them together.
Rusty
|