Ed wrote:
Ok, Paul
Using the K&W formulas, I
calculate that the 14x10 core area would
handle 120HP at 120MPH TAS, you would need to get to
160 MPH to get the mass
flow to handle 160HP.
Just scaling your
power number on the basis of core area; it comes to about 225hp for my
setup. I designed for 200 hp at 120 mph; so I guess that is reasonable
close correlation. Either we’re both right, or both wrong
J.
Al
Thanks, AL.
Hopefully I will find out in a couple of months. Paul
Conner