|
Today the weather finally turned nice, the sun
actually came out. I installed the new injectors I received from
fiveOmotorsports, they are 550 cc's. With the mixture full rich, I hit the
starter and the fuel really flowed in. It finally started on the Weber at
wide open throttle. The plugs I'm using are the NGK - B9EGV, which
has the electrode exposed like in typical plugs, unlike the center electrode
buried in the hole, as in the normal plugs for the l3B. These seem to
stand some flooding better than the RE7C-L and RE9B-T
With the mixture control full lean it ran, but with
the program value knob I can't lean far enough in the lower rpm's, 1800 - 2000
rpm's and 13 #'s manifold pressure. The manual says to go to mode 3 and
lower the mixture in 3% steps. Is this 3% step equal to what the mixture
control knob achieves in turning it full left. I guess I'm looking for
some guidance here, so I don't get it screwed up and have to start over several
times. Thanks in advance. JohnD
|