Thanks Kelly and Bryan,

As far as I can tell, the flywheel is just right.  I'm not sure how
much vibration would result from the wrong flywheel, but it sure
doesn't have much.  :)  The Centerforce II clutch feels real good too.

Bob W.


On Sun, 25 Oct 2009 17:38:17 +0000
"Kelly Troyer" <keltro@att.net> wrote:

> Looking good Bob !!................I guess the flywheel worked out OK...................
> --
> Kelly Troyer
> "Dyke Delta"_13B ROTARY Engine
> "RWS"_RD1C/EC2/EM2
> "Mistral"_Backplate/Oil Manifold
>
>
>
>
>
> -------------- Original message from Bob White <bob@bob-white.com>: --------------
>
>
> > I finally got my Alpine running with the rotary engine that was in the
> > BD-4 before I wrecked it. Movie produced and distributed via Youtube.
> >
> > http://www.youtube.com/watch?v=FwceNc2ydN8
> >
> > Once I got all the electrical connections correct, it fired right up.
> > I am using Tracy's EC2 and EM2. I had the large display on the EM2, an
> > it wouldn't fit but the smaller display was a direct replacement. I
> > just had to move the wires from one to the other. I'm really
> > interested in finding out how well the EC2 will work in the auto
> > application. My speedometer is GPS based for now.
> >
> > The exhaust is a header with 2 to 1 collector that ends just under the
> > passenger seat. Next stop is the muffler shop!
> >
> > I was expecting more smoke on first start since I had pickled the
> > engine with oil a year and a half ago. I used the two stroke oil, so
> > that may have reduced smoke output some.
> >
> > Bob W.
> >
> > --
> > N93BD - Rotary Powered BD-4 - http://www.bob-white.com
> > 3.8 Hours Total Time and holding
> > Cables for your rotary installation - http://roblinstores.com/
> >
> > --
> > Homepage: http://www.flyrotary.com/
> > Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
>


--
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://roblinstores.com/