-------------- Original message from Bob White <bob@bob-white.com>: --------------


> I finally got my Alpine running with the rotary engine that was in the
> BD-4 before I wrecked it. Movie produced and distributed via Youtube.
>
> http://www.youtube.com/watch?v=FwceNc2ydN8
>
> Once I got all the electrical connections correct, it fired right up.
> I am using Tracy's EC2 and EM2. I had the large display on the EM2, an
> it wouldn't fit but the smaller display was a direct replacement. I
> just had to move the wires from one to the other. I'm really
> interested in finding out how well the EC2 will work in the auto
> application. My speedometer is GPS based for now.
>
> The exhaust is a header with 2 to 1 collector that ends just under the
> passenger seat. Next stop is the muffler shop!
>
> I was expecting more smoke on first start since I had pickled the
> engine with oil a year and a half ago. I used the two stroke oil, so
> that may have reduced smoke output some.
>
> Bob W.
>
> --
> N93BD - Rotary Powered BD-4 - http://www.bob-white.com
> 3.8 Hours Total Time and holding
> Cables for your rotary installation - http://roblinstores.com/
>
> --
> Homepage: http://www.flyrotary.com/
> Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html