----- Original Message -----
Sent: Sunday, December 21, 2003 5:27
PM
Subject: [FlyRotary] Help !!!
Hi, fellow rotary enthusiasts.....I finally got
my EFI system wired up, and I am now attempting to hook up the last few items
so I can start this thing up, make noise and scare the neighbors. I took
a few photos, and labeled the items in question....I don't know what these
sensors and connections are or should be. Any help would be much
appreciated. It is a 1989 turbo model engine, if that helps. I will send
this message in two parts, so download times won't be so bad. Items one and
two are just underneath the oil cooler. Item #1 is a small threaded sensor
with two wires coming out of it. Item #2 is Larger, and has two
connectors at the end.
In the second picture,
Item #3 also has 2 wires. It is octagon in shape.
Item #4 is a plug on the
lower tube of the water pump. I thought this might go to the turbo, if one
were installed?
Item #5 Is a plug
on the upper section of the water pump, next to the water temp sensor.
(I actually figured out and wired the water temp sensor, all by
myself).
Item #6 is another
sender of some type, with two wires coming out of it.
Thanks in advance for your assistance in
identifying these items. I know many of you have been there and done
that. sincerely, Paul Conner
>> Homepage:
http://www.flyrotary.com/
>> Archive:
http://lancaironline.net/lists/flyrotary/List.html