Received-SPF: pass
 receiver=logan.com; client-ip=72.52.218.78; envelope-from=bob@bob-white.com
Date: Sun, 6 Sep 2009 22:11:26 -0600
From: Bob White <bob@bob-white.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Fuel filter recommendations?
Message-Id: <20090906221126.f29cad55.bob@bob-white.com>
In-Reply-To: <list-3839537@logan.com>
References: <list-3839537@logan.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Hi John,

Somewhere during my installation, I ran across the Perma Cool filters.
They are good to 90 psi, filter to 2 microns, include a water
separator, and are large (same size as an oil filter).  I didn't fly
with it long enough to have any trouble, but have re-installed it in my
auto project.  Because of the size, I felt comfortable using a single
filter on the output of both fuel pumps. 

http://perma-cool.com/Catalog/Cat_page26.html

Bob W.


On Sun, 06 Sep 2009 22:24:38 -0400
John Slade <jslade@canardaviation.com> wrote:

> After my recent indent, I'd like get better fuel filters.
> Any recommendations for a filter that can handle the fuel flow and 
> pressure, with a higher capacity than the Earls ones?
> Ideally I'd like to use something that someone else has flown and never 
> had trouble with :)
> John
>  
> 
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html


-- 
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://roblinstores.com/