X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from fmailhost05.isp.att.net ([207.115.11.55] verified) by logan.com (CommuniGate Pro SMTP 5.2.14) with ESMTP id 3750051 for flyrotary@lancaironline.net; Wed, 08 Jul 2009 19:54:32 -0400 Received-SPF: pass receiver=logan.com; client-ip=207.115.11.55; envelope-from=bbradburry@bellsouth.net Received: from desktop (adsl-230-107-115.mco.bellsouth.net[74.230.107.115]) by isp.att.net (frfwmhc05) with SMTP id <20090708235353H050018113e>; Wed, 8 Jul 2009 23:53:53 +0000 X-Originating-IP: [74.230.107.115] From: "Bill Bradburry" To: "'Rotary motors in aircraft'" References: In-Reply-To: Subject: RE: [FlyRotary] SAG- Spark plugs 2592 or 2692? Date: Wed, 8 Jul 2009 19:53:55 -0400 Message-ID: <901BF716DD464A9392815D809C92D93C@Desktop> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0009_01CA0005.D3DE5400" X-Mailer: Microsoft Office Outlook 11 Thread-Index: AcoAJjC+UQVLzAvMQoGbjKHI9XXnDwAAHrEw X-MimeOLE: Produced By Microsoft MimeOLE V6.0.6001.18049 This is a multi-part message in MIME format. ------=_NextPart_000_0009_01CA0005.D3DE5400 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Kelly. I have always been afraid to change something like plugs that I don't know anything about. I read somewhere that the plug could extend into the chamber and be hit by the apex seal. How would you know that a plug would fit if it is not listed?? (other than Lynn said it would :>) ) Bill B _____ From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Kelly Troyer Sent: Wednesday, July 08, 2009 7:45 PM To: Rotary motors in aircraft Subject: [FlyRotary] SAG- Spark plugs 2592 or 2692? Bill, You are correct................You have to look up the AR2592 plugs by part number............This plug is actually used in some early Chevrolet and Chrysler Big block engines for racing.......... -- Kelly Troyer "Dyke Delta"_13B ROTARY Engine "RWS"_RD1C/EC2/EM2 "Mistral"_Backplate/Oil Manifold -------------- Original message from "Bill Bradburry" : -------------- Kelly, I don't see a call out for the rotary engine in the Autolite info.??? Bill B _____ From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Kelly Troyer Sent: Wednesday, July 08, 2009 3:27 PM To: Rotary motors in aircraft Subject: [FlyRotary] SAG- Spark plugs 2592 or 2692? Jeff and All, I believe the mystery is solved...............Apparently "AR2692" is a typo error and "AR2592" is correct..............Check out the link below............Full of info..... http://www.autolite.com/pdf/Autolite_HP_Apps.pdf Kelly Troyer "Dyke Delta"_13B ROTARY Engine "RWS"_RD1C/EC2/EM2 "Mistral"_Backplate/Oil Manifold -------------- Original message from "Kelly Troyer" : -------------- Jeff, I have never found a trace of a "AR2692"............Lynn which is correct ??................... -- Kelly Troyer "Dyke Delta"_13B ROTARY Engine "RWS"_RD1C/EC2/EM2 "Mistral"_Backplate/Oil Manifold -------------- Original message from Jeff Whaley : -------------- Lynn's email referenced 2 part numbers . Poor folks race with Autolight AR2692 and . In the picture, left to right is the Autolight AR2592. So which number is it correct? 2592 or 2692? Jeff From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Kelly Troyer Sent: Wednesday, July 08, 2009 2:35 PM To: Rotary motors in aircraft Subject: [FlyRotary] SAG- Spark plugs Lynn and Group, I checked my local "Auto Zone" and they claimed to be unable to get the "AutoLite" AR2592 sparkplug...............Checked "Rock Auto" (Link below) and they have them in packs of 4 for $2.69 (each plug)...........Ordered 8 of them for $21.52 + $5.47 shipping but "AutoLite" has a rebate offer of $0.50 per plug for up to 16 plugs until Nov. 30,2009 for copper core plugs (rebate link below).............To find the sparkplug do a part number search (AR2592) , Add the manufacturer (AutoLite) , Then use "all" for the part group because if you use "Ignition" and "Sparkplug" for part type it will say "No part found".... FWIW http://www.rockauto.com/catalog/raframecatalog.php?a=G-Store http://www.autolite.com/rebate/pdf/spark-plug-09.pdf -- Kelly Troyer "Dyke Delta"_13B ROTARY Engine "RWS"_RD1C/EC2/EM2 "Mistral"_Backplate/Oil Manifold -------------- Original message from Lynn Hanover : -------------- In a message dated 7/7/2009 3:22:56 P.M. Pacific Daylight Time, bbradburry@bellsouth.net writes: Steve, I hope Lynn chimes in here. He has seen a lot of plugs under a lot of conditions. They look pitted to me. There seems nothing wrong with your conditions. The only thing on the list would be too lean.?? Someone is out there writing up a great response right now! :>) Bill B That plug has been too hot. Stock Mazda plugs are rather cold in heat range by way of the guards around the shell. The electrode runs a bit hotter than normal. Plug heat ranges are determined by how far down the shell the porcelain touches. The longer the heat path, the hotter the plug. Using car plugs in the aircraft application seems to be asking for trouble. In the car on the freeway you use 2,600 RPM and 1/2 throttle, maybe 24 to 28 HP. Not much of a challenge for a spark plug. But there is the driver who will jump into his 95 twin turbo in LA and run out to LasVegas at full tilt and expect to still have an engine when he gets there. And usually he does. So, if I was to use a street plug in an aircraft, I would use the 93-95 twin turbo plug, whatever that is. The aircraft application, less the 100LL fuel problem, is clearly a cold racing plug with a conventional gap or close to it. Years ago when we started racing rotaries, Champion said to use the N-57G Fine wire center with gold paladium plating and a conventional ground strap. About 20% of the center wire is exposed in an end view. The N-57G and similar are discontinued and the N-82 series replaced it. The shell is thinner and the porcelain is wider. Same fine wire center, no gold anything. 20% of the wire exposed in an end view. Both worked fine even with points and a Kettering coil. Poor folks race with Autolight AR2692 end style and small porcelain just like the N-57G. Full size center wire, conventional strap, but 100% of the center wire is exposed in an end view. Actually used by NASCAR and the local circle track people, and stocked by Autozone and others. About $5.00 a box of 4. They work fine. I raced them one weekend, no problems, but we were getting the NGK plugs for free so I stuck with them. The NGKR6725-115 stamped on the body actually means that the heat range is 11.5 not 115. $25.00 each. 50% of the center wire exposed in an end view. Free for some Rotary engined competitors. Retracted gap (the whole thing is inside the shell. Fine wire center and fine wire ground strap. Ice cold. Long body so it is easy to install and remove in the rotary. I grind off those eyebrow things above the plug holes so I can use any plug I like. And any 5/8" plug just goes in so easy. Most heat ranges are available in the 5/8" shells. Rotaries do not like high heat range plugs. The housings crack across the leading plug hole. Over time a complete set of radial cracks form. In the picture, left to right is the Autolight AR2592, Champion N-82, NGK R6725-115, and Champion N-57G. Lynn E. Hanover ------=_NextPart_000_0009_01CA0005.D3DE5400 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

Kelly.

I have always been afraid to change something like plugs that I = don’t know anything about.  I read somewhere that the plug could extend = into the chamber and be hit by the apex seal.  How would you know that a = plug would fit if it is not listed??  (other than Lynn said it would :>) = ) 

Bill B

From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Kelly Troyer
Sent: Wednesday, July 08, = 2009 7:45 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] SAG- = Spark plugs 2592 or 2692?

Bill,

 You are correct................You have to look up the = AR2592 plugs by part number............This plug

is actually used in some early Chevrolet and Chrysler Big = block engines for racing..........

--
Kelly Troyer
"Dyke Delta"_13B ROTARY Engine
"RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifold


 

-------------- Original message from "Bill Bradburry" = <bbradburry@bellsouth.net>: = --------------


Kelly,

I don’t see a call out for the rotary engine in the = Autolite info…???

 

Bill B 

 

From: Rotary motors in = aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Kelly Troyer
Sent: Wednesday, July 08, = 2009 3:27 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] SAG- = Spark plugs 2592 or 2692?

Jeff and = All,

 

       I believe the mystery is solved...............Apparently "AR2692" is a typo = error

and "AR2592" is correct..............Check out the = link below............Full of info..... 

 

 


Kelly Troyer
"Dyke Delta"_13B ROTARY Engine
"RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifold

 

-------------- = Original message from "Kelly Troyer" <keltro@att.net>: = --------------

Jeff,

  I have never found a trace of a = "AR2692"............Lynn which is correct ??...................

--
Kelly Troyer
"Dyke Delta"_13B ROTARY Engine
"RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifold

 

-------------- = Original message from Jeff Whaley <jwhaley@datacast.com>: -------------- =

Lynn<= /st1:City>’s email referenced 2 part numbers … = Poor folks race with Autolight AR2692 and … In the picture, left to = right is the Autolight AR2592.

So which number is it correct? = 2592 or 2692?

Jeff

 <= /o:p>

From: = Rotary motors in = aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Kelly Troyer
Sent: Wednesday, July 08, = 2009 2:35 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] SAG- = Spark plugs

 

Lynn and Group,

 

         I checked my = local "Auto Zone" and they claimed to be unable to get the "AutoLite"

AR2592 sparkplug...............Checked "Rock Auto" = (Link below) and they have them in

packs of 4 for $2.69 (each plug)...........Ordered 8 of them for = $21.52 + $5.47 shipping

but "AutoLite" has a rebate offer of $0.50 per plug = for up to 16 plugs until Nov. 30,2009

for copper core plugs (rebate link below).............To find = the sparkplug do a part number

search (AR2592) , Add the manufacturer (AutoLite) , Then = use "all" for the part group

because if you use "Ignition" and = "Sparkplug" for part type it will say "No part = found"....

 

FWIW 

 

 

 

--
Kelly Troyer
"Dyke Delta"_13B ROTARY Engine
"RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifold

 

-------------- = Original message from Lynn Hanover <lehanover@gmail.com>: -------------- =

In a message dated 7/7/2009 3:22:56 P.M. Pacific Daylight Time, = bbradburry@bellsouth.net = writes:

Steve,
I hope Lynn chimes in here.  He has seen a lot of plugs under a lot of
conditions.  They look pitted to me.  There seems nothing = wrong with your
conditions.  The only thing on the list would be too lean.??
Someone is out there writing up a great response right now!  = :>)
Bill B

That plug has been too hot.

 

Stock Mazda plugs are rather cold in heat range by way of the = guards around the shell. The electrode runs a bit hotter than normal. Plug heat = ranges are determined by how far down the shell the porcelain touches. The = longer the heat path, the hotter the plug.

 

Using car plugs in the aircraft application seems to be asking = for trouble. In the car on the freeway you use 2,600 RPM and 1/2 throttle, = maybe 24 to 28 HP. Not much of a challenge for a spark plug. But there is = the

driver who will jump into his 95 twin turbo in LA and run out to LasVegas at full tilt and expect to still have an engine when he = gets there. And usually he does.  So, if I was to use a street plug in = an aircraft, I would use the 93-95 twin turbo plug, whatever that = is.

 

The aircraft application, less the 100LL fuel problem, is = clearly a cold racing plug with a conventional gap or close to it. =

 

Years ago when we started racing rotaries, Champion said to use = the N-57G Fine wire center with gold paladium plating and a conventional = ground strap. About 20% of the center wire is exposed in an end = view.

 

The N-57G and similar are discontinued and the N-82 series = replaced it. The shell is thinner and the porcelain is wider. Same fine wire center, = no gold anything. 20% of the wire exposed in an end view. =

Both worked fine even with points and a Kettering coil.

 

Poor folks race with Autolight AR2692 end style and small = porcelain just like the N-57G. Full size center wire, conventional strap, but 100% = of the center wire is exposed in an end view. Actually used by NASCAR and the = local circle track people, and stocked by Autozone and others. About $5.00 a = box of 4. They work fine. I raced them one weekend, no problems, but we were = getting the NGK plugs for free so I stuck with them. =

 

The NGKR6725-115 stamped on the body actually means that the = heat range is 11.5 not 115. $25.00 each.

50% of the center wire exposed in an end view. Free for some = Rotary engined competitors. Retracted gap (the whole thing is inside the shell. = Fine wire center and fine wire ground strap. Ice cold. Long body so it is = easy to install and remove in the rotary.

 

I grind off those eyebrow things above the plug holes so I can = use any plug I like. And any 5/8" plug just goes in so easy. Most heat = ranges are available in the 5/8" shells.

 

Rotaries do not like high heat range plugs. The housings crack = across the leading plug hole. Over time a complete set of radial cracks form. =

 

In the picture, left to right is the Autolight AR2592, Champion = N-82, NGK R6725-115, and Champion

N-57G. 

 

Lynn E. Hanover

 

------=_NextPart_000_0009_01CA0005.D3DE5400--