flyrotary@lancaironline.net Mailing List Archive

John,

Thanks for the boost. I've been through the continuity test thing with wiggling connectors and many hours with an ohmmeter. I'm confident its not a faulty/intermittent connection issue but have another theory. See my reply to Ed.

Mike

----- Original Message -----

From: John Slade

To: Rotary motors in aircraft

Sent: Wednesday, July 01, 2009 6:36 AM

Subject: [FlyRotary] Re: frustrating couple of days

>I'm back to where I was a year ago and I'm just about fed up with this thing.
I remember that feeling very well. I had the very same symptoms (among others). Finally I ripped out the EC2 and EM2 and took them to Tracy personally. He was gracious enough to check them out while I waited. I can't recall what he found and fixed, but I do remember that I was getting a bad connection at the EC2 connector. The male and female parts of the connector were of slightly different design (the EC2 body was upgraded and the cable not), and the pins weren't getting a consistent connection. A slight wiggle of the connector plug would recreate my symptoms. Once this was fixed the problem went away and never returned. The EC2 has performed flawlessly ever since, which is good because I don't think I could have made past another round of errors.
The problem is in there somewhere, Mike. Don't let it win.
Regards,
John Slade
--

Homepage:  http://www.flyrotary.com/

Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html