|
John,
Glad to hear your CAS looks like it is OK..........I just checked out one of mine in
anticipation of sending it to you if necessary.........The Mazda factory manual calls for
110 to 200+ ohms across each pair of contacts of the CAS connector.........My CAS
had about 195 ohms across each pair........Hang in there.......You are about to get it
whipped !!...........<:)
--
Kelly Troyer
"Dyke Delta"_13B ROTARY Engine
"RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifold
-------------- Original message from "John Downing" <downing.j@sbcglobal.net>: --------------
After messing around with the plug, I discovered that the contacts were dirty and the CAS is functioning. Tomorrow I'll recheck the timing (third time) and see if I get spark. JohnD
|