Mailing List flyrotary@lancaironline.net Message #43694
From: <wrjjrs@aol.com>
Subject: Re: [FlyRotary] Re: exhaust manifold
Date: Mon, 11 Aug 2008 11:43:05 -0400
To: <flyrotary@lancaironline.net>
 Message Header

Undecoded Message
George,
Pool handrail is much more likely to be 303 or 304 ss. 316 is much more expensive and is normally used only for speciality tubing.
Bill Jepson


-----Original Message-----
From: George Lendich <lendich@optusnet.com.au>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Sat, 9 Aug 2008 3:09 pm
Subject: [FlyRotary] Re: exhaust manifold

Michael,
Swimming pool handrail is most likely 316ss, but .045" is approx 1.2mm thick and you would want 1.6mm ( .062") for exhaust headers.
George (down under)
----- Original Message -----
Sent: Sunday, August 10, 2008 6:46 AM
Subject: [FlyRotary] Re: exhaust manifold

Kelly:
 
That is actually very heplfull. On monday I will go to my local supplier and see if I can lay my hands on some sched 5 or ched 10 SS ells and see what they look like. I did mock something up with some of the pool handrail SS pipe I have but not sure about the material as it is onlly .045 thick wall and I do not know what grade SS it is.
 
Michael
 
 
----- Original Message -----
 
Michael,
     I stand corrected........Link to expanded pipe schedules !! 
 
 
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster