Received-SPF: none
 receiver=logan.com; client-ip=68.230.241.41; envelope-from=alventures@cox.net
From: "Al Gietzen" <ALVentures@cox.net>
To: "'Rotary motors in aircraft'" <flyrotary@lancaironline.net>
Subject: RE: [FlyRotary] EM-2 signals to an EFIS?
Date: Sun, 10 Aug 2008 16:26:31 -0800
Message-ID: <000101c8fb48$e783f0e0$6401a8c0@BigAl>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit
Importance: Normal
In-Reply-To: <list-3070142@logan.com>

OK; that's two of us. I asked about this about 3 years ago.  How many more
EM2s are out there with the GRT EFIS, and when does it become economically
feasible?

AL G


-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Phil White
Sent: Sunday, August 10, 2008 12:56 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] EM-2 signals to an EFIS?

Tracy:     When ordering an EFIS from GRT at Oshkosh, I inquired about 
whether their EFISes could show the engine figures (normally obtained 
from their EIS unit) from the EM-2.   Todd indicated he had spoken to 
you at some point about you providing to GRT the data sequence that the 
EM-2 could provide, so they could write software to allow the EFIS to 
show graphic engine status.

    We don't want to give up the Auto-Tune features of the EM-2, but it 
sure would help to be able to see RPM, MAP, fuel levels, % power on a 
single screen with the flight info.

    Is it a reasonable expectation that you may be able to provide the 
needed info to GRT so they could display it?  In this lifetime? :-)

Phil White, 20B headed to an RV-10

--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html