Received-SPF: pass
 receiver=logan.com; client-ip=65.203.23.149; envelope-from=rjechtinaw@toast.net
Message-Id: <F21E8485-7B8A-4B84-B864-7ABDD06EB8E1@toast.net>
From: randy echtinaw <rjechtinaw@toast.net>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes
Content-Transfer-Encoding: 7bit
Mime-Version: 1.0 (Apple Message framework v919.2)
Subject: Rebuild 
Date: Mon, 4 Aug 2008 18:46:38 -0400

I won't bore you gentlemen by whinning on how I lost 3 years worth of  
rotary emails thanks to consumers Power Co. but I have. I didn't  
bother to actually learn any of this because I planned on being able  
to look up all the posts I had in separate files for every item on the  
engine. My how things can change in 1 minute :(((

Now I need to compile a list of what I need to ask to have done to my  
RX-8 4-port engine to convert it to aircraft use. Including what flex  
plate etc. It will be P-ported and hopefully use the bell housing  
being developed on the "other" site. Unfortunately, many things on the  
"other" site have gotten part way through development and fallen off  
the table so we shall see :(

If you gentlemen would be so kind as to just throw up a short list of  
things you personally would have done I can compile a good list.

Thank you very much,
Randy