X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from [64.12.143.101] (HELO imo-m13.mail.aol.com) by logan.com (CommuniGate Pro SMTP 5.2.5) with ESMTP id 3048623 for flyrotary@lancaironline.net; Wed, 30 Jul 2008 14:30:27 -0400 Received: from WRJJRS@aol.com by imo-m13.mx.aol.com (mail_out_v38_r9.4.) id q.c7c.3150ba98 (37567) for ; Wed, 30 Jul 2008 14:30:22 -0400 (EDT) Received: from smtprly-da03.mx.aol.com (smtprly-da03.mx.aol.com [205.188.249.146]) by cia-mb04.mx.aol.com (v121_r2.11) with ESMTP id MAILCIAMB044-92bf4890b33e2a3; Wed, 30 Jul 2008 14:30:22 -0400 Received: from webmail-nc01 (webmail-nc01.sim.aol.com [207.200.67.22]) by smtprly-da03.mx.aol.com (v121_r2.11) with ESMTP id MAILSMTPRLYDA035-5bbe4890b3341bf; Wed, 30 Jul 2008 14:30:12 -0400 References: To: flyrotary@lancaironline.net Subject: Re: [FlyRotary] Re: Safety wire Date: Wed, 30 Jul 2008 14:30:12 -0400 X-AOL-IP: 66.253.96.220 In-Reply-To: X-MB-Message-Source: WebUI MIME-Version: 1.0 From: wrjjrs@aol.com X-MB-Message-Type: User Content-Type: multipart/alternative; boundary="--------MB_8CAC08970160C41_1054_25AA_webmail-nc01.sysops.aol.com" X-Mailer: AOL Webmail 37955-STANDARD Received: from 66.253.96.220 by webmail-nc01.sysops.aol.com (207.200.67.22) with HTTP (WebMailUI); Wed, 30 Jul 2008 14:30:12 -0400 Message-Id: <8CAC0896FD0E8BD-1054-12EC@webmail-nc01.sysops.aol.com> X-Spam-Flag:NO ----------MB_8CAC08970160C41_1054_25AA_webmail-nc01.sysops.aol.com Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset="us-ascii" Kelly, That is true "except" that the better quality allen bolts, Holo-Chrome, SPS,? etc are case hardened. Be sure you get cobalt drills! Bill Jepson -----Original Message----- From: Kelly Troyer To: Rotary motors in aircraft Sent: Wed, 30 Jul 2008 8:57 am Subject: [FlyRotary] Re: Safety wire Keith, ??? If you use "Allen Head" bolts they are much easier to drill the small sizes?as they have a round head........IMHO !!. ? -- Kelly Troyer "Dyke Delta"_13B ROTARY Engine "RWS"_RD1C/EC2/EM2 "Mistral"_Backplate/Oil Manifold ? -------------- Original message from John Slade : -------------- > I think I got them from NAPA > > ktradcliff@comcast.net wrote: > > Hey John, > > > Where did you get pre-drilled bolts for your oil pan? I am very afraid to > drill bolts this small. > > > > Keith > > > > > -- > Homepage: http://www.flyrotary.com/ > Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html ----------MB_8CAC08970160C41_1054_25AA_webmail-nc01.sysops.aol.com Content-Transfer-Encoding: 7bit Content-Type: text/html; charset="us-ascii" Kelly,
That is true "except" that the better quality allen bolts, Holo-Chrome, SPS,  etc are case hardened. Be sure you get cobalt drills!
Bill Jepson


-----Original Message-----
From: Kelly Troyer <keltro@att.net>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Wed, 30 Jul 2008 8:57 am
Subject: [FlyRotary] Re: Safety wire

Keith,
    If you use "Allen Head" bolts they are much easier to drill the small sizes as they
have a round head........IMHO !!.
 
--
Kelly Troyer
"Dyke Delta"_13B ROTARY Engine
"RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifold



 
-------------- Original message from John Slade <sladerj@sbcglobal.net>: --------------


> I think I got them from NAPA
>
> ktradcliff@comcast.net wrote:
> > Hey John,
> > > Where did you get pre-drilled bolts for your oil pan? I am very afraid to
> drill bolts this small.
> >
> > Keith
> >
>
>
> --
> Homepage: http://www.flyrotary.com/
> Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
----------MB_8CAC08970160C41_1054_25AA_webmail-nc01.sysops.aol.com--