If worse
comes to worse, Magnecor will custom make them.
http://www.magnecor.com/magnecor1/main.htm
Steve
Brooks
-----Original
Message-----
From: Rotary motors in aircraft
[mailto:flyrotary@lancaironline.net]On Behalf
Of Bob Kaufmann
Sent: Sunday, July 13, 2008 12:58
PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: spark
plugs
I’m
using the LS-1 coils for my 20B, what type of plug wires should I use? My
longest run is 24 inches.
Bob
K
RV-10
getting closer, its all done, just don’t have it together yet, or 90/90
From: Rotary motors in aircraft
[mailto:flyrotary@lancaironline.net] On
Behalf Of John Downing
Sent: Sunday, July 13, 2008 8:47
AM
To: Rotary motors in aircraft
Subject: [FlyRotary] spark plugs
I
pulled the plugs out, they were the ones that came from Atkins, these plugs
looked new on the outside, but were used to keep dirt out of engine, as they
were used and plugged full of carbon. The plugs are NGK T-SD 11A;
L-SD 10A. I see where Lynn and AL are using NKG R6725-11.5's, Is
this plug used as a leading and trailing plug? At any rate, I need to get
some new plugs. JohnD