Received-SPF: pass
 receiver=logan.com; client-ip=72.52.218.78; envelope-from=bob@bob-white.com
Date: Sun, 13 Jul 2008 12:52:41 -0600
From: Bob White <bob@bob-white.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: spark plugs
Message-Id: <20080713125241.da82154e.bob@bob-white.com>
In-Reply-To: <list-3024158@logan.com>
References: <list-3024158@logan.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Tracy was selling custom made ignition wires at one point.  His search
engine isn't working, and I can't find them on the web site.

Magnecor also will make them up to whatever length you need.
http://www.magnecor.com/magnecor1/main.htm

I bought a set of MSD plug wires at a local speed shop that fit the LS-1
coils without any modification.  All 8 were the same length and fairly
short.  I don't remember what vehicle the were supposed to fit.

Bob W.


On Sun, 13 Jul 2008 10:49:05 -0800
"Al Gietzen" <ALVentures@cox.net> wrote:

>  
> 
>  
> 
> I use MSD SuperConductor wires, and NGK B9EGV plugs with the LS1 coils.
> 
>  
> 
>  
> 
> BTW; I bought a set of the wires for Chevy pickup that uses the LS1 engine
> (less expensive).  I had to call MSD directly to get the proper end plugs
> for the coils - they sent them for free.
> 
>  
> 
> Al
> 
> 


-- 
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://roblinstores.com/cables/