Mailing List flyrotary@lancaironline.net Message #43434
From: Bob Kaufmann <bob.kaufmann@cox.net>
Subject: RE: [FlyRotary] spark plugs
Date: Sun, 13 Jul 2008 09:57:53 -0700
To: 'Rotary motors in aircraft' <flyrotary@lancaironline.net>

I’m using the LS-1 coils for my 20B, what type of plug wires should I use?  My longest run is 24 inches.

 

Bob K

RV-10 getting closer, its all done, just don’t have it together yet, or 90/90

 

 

From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of John Downing
Sent: Sunday, July 13, 2008 8:47 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] spark plugs

 

I pulled the plugs out, they were the ones that came from Atkins, these plugs looked new on the outside, but were used to keep dirt out of engine, as they were used and plugged full of carbon.  The plugs are NGK T-SD 11A; L-SD 10A.  I see where Lynn and AL are using NKG R6725-11.5's, Is this plug used as a leading and trailing plug?  At any rate, I need to get some new plugs.  JohnD

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster