flyrotary@lancaironline.net Mailing List Archive

Bobby,

What's it weigh? Sure isnt cheap! For that price I sure hope it isnt a failed experiment. How far along is your project (in other words when will we get some feedback on whether or not it works)? I love the idea of a water to air exchanger but in the end I chickened out. Sure would like to get rid of an extra cowl inlet and a bunch of plumbing though!

Mike Wills

RV-4 N144MW

----- Original Message -----

From: Bobby J. Hughes

To: Rotary motors in aircraft

Sent: Wednesday, May 14, 2008 11:40 AM

Subject: [FlyRotary] Re: Oil/water cooler

Al,

I have the dual core E54-329 sitting between two 400ci radiators. No idea how it will work yet.

Bobby

From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Al Gietzen
Sent: Wednesday, May 14, 2008 12:16 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Oil/water cooler

Who makes the water/oil cooler system I've heard about, and does it work???

Thanks again.

I recently installed a MoCal Laminova 43-330 oil/water heat exchanger as a backup to my oil/air cooler. It works as advertised; and will handle roughly ¼ - 1/3 of the heat load for the 20B. That was all I needed to keep my oil temps below max during climb on a hot day.

Setrab still makes a couple of units of lower capacity TOC-150 and TOC-200, but the larger TOC-300 is currently out of production.

Fluidyne no longer makes oil/water units, but some still show up now and then on e-bay.

C&R racing will make a higher capacity unit for you – at a price.

Al

--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html