|
Carlos knows rotaries inside and out drag races
them and builds them. His only problem no one knows about him. I stopped at his
shop last year before going to sun n fun and he showed me his turbo 20b
drag racing car. I don't think you would go wrong by having him do your work.
Check it out
Regards
Ed Klepeis
----- Original Message -----
Sent: Thursday, March 06, 2008 4:26
PM
Subject: [FlyRotary] Re: Help
I found this number for
Carlos
Carlos Gonzales #
in Ocala Fl. is : (352) 266 5201
What does he do,
Ed?
Bill
B
From:
Rotary motors in aircraft
[mailto:flyrotary@lancaironline.net] On
Behalf Of Ed Klepeis
Sent: Thursday, March 06, 2008 5:09
PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re:
Help
Why don't you give Carlos Gonzales in Ocala a call and see if he could help you
he's in your back yard.
----- Original Message -----
Sent:
Thursday, March 06, 2008 4:00 PM
Subject:
[FlyRotary] Help
Thanks for all the response on
the subject. I guess, I should have asked these question
earlier.
I contacted Paul after the last
rotary meet about spin balancing the single rotor. The answer was - no
problem, we can do it-. So I packed all the rotating parts, assembled in a
nice shipping container and send it on its way to Phoenix. After about
two weeks, I e-mailed asking what happened with my parts. It was confirmed
that the parts arrived. In early December, an e-mailed request for update
was not answered. So I called the phone NR. listed for injection equipment
on the website. When the answering machine came on I hung up. Later that
day, Paul called back, asking what I needed. When I told him who I was, he
told me that the balancer was broke and he could not do my parts before the
holidays. That was ok with me.
The problem is, this was the
last I heard since. No e-mail answer and no phone call
return.
I guess one more e-mail with the
request to return my stuff, is what I am going to
do.
|