Received-SPF: pass
 receiver=logan.com; client-ip=207.115.11.52; envelope-from=atlasyts@bellsouth.net
From: atlasyts@bellsouth.net
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] wire harness adaptor
Date: Tue, 12 Feb 2008 20:32:57 +0000
Message-Id: <021220082032.17078.47B2027900005E9D000042B622193100029B0A02D2089B9A019C04040A0DBF9C9B979C0E049B0E@att.net>

Bob, I had the same problem. Was not able to find a new one. Found a case that worked with the original 37 pin plug. I'll check if I still have it?
Buly

--
Bulent Aliev
CZ MK-IV  FXE
FT LAUDERDALE, FL 


-------------- Original message ----------------------
From: bmears9413@aol.com
>
> 
> 
> 
> 
> 
> Bob White, or anyone with advise,
> 
> I would like to find an adaptor of some kind to get a lower profile on my EC2. I 
> had the 90 degree end installed, but it still takes up over 2" of space. In my 
> case it will hit the fuel tank. I can modify the tank if necessary. But if it 
> was as simple as plugging a low profile adaptor, that would be the thing to do.
> 
> Bob Mears
> Supermarine Spitfire
> 
> 
> ________________________________________________________________________
> More new features than ever.  Check out the new AOL Mail ! - 
> http://webmail.aol.com