Paul,
You may want to try a
non-Mazda connector such as the weatherprof connectors on these links.
This is the company Waytek
Wire:
The Metri-Pak series would
cost about $2.50 for a 4-pin male-female complete connector. Be sure to get the seals for this type. You'll
need two 'TPAs' and one 'CPA' for each connector, as well as the total number of
male and female pins. Metri-Pak is
the family of connectors used on the LT1 coil wiring harness (1-to-6 pins
available, sealed, positive lock, 14 amps per wire, Delphi (was Packard) is
manufacturer).
The Mate-N-Lok series is
cheaper, but not sealed (I think would do just as well). These are the connectors Jim Wier references in
his Kit Planes magazines for his KARMIC connector standard (1-to-24 pins,
positive locking, 5 amps per wire, many manufacturers and distributors...Mouser,
Digi-Key, but by far the cheapest is
Newark).
If you'd like any help with
these, feel free to reply or call me
during the day at 256.603.1923 (my
cell).
Chris
Sargent