Received-SPF: none
 receiver=logan.com; client-ip=63.240.77.84; envelope-from=rlwhite@comcast.net
Date: Fri, 2 Nov 2007 22:53:27 -0600
From: Bob White <rlwhite@comcast.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: cockpit sound
Message-Id: <20071102225327.1b2529c4.rlwhite@comcast.net>
In-Reply-To: <list-2453207@logan.com>
References: <list-2453207@logan.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

The climb rpm was around 7300.  When I reduced the power there were two
quick changes.  The first was 6400 rpm, then I adjusted it to 5900.
It stayed there for a while.  The video was monitoring the EM2.

Bob W.


On Sat, 03 Nov 2007 00:10:25 -0400
Ernest Christley <echristley@nc.rr.com> wrote:

> Bob provided an excellent clip.  Xplane only needs a few seconds of the 
> engine sound, and then reproduces that over and over.  You tell it what 
> RPM the sound was recorded at, and it varies the sound with the engine 
> RPM.  Bob, what RPM did you record that sound at?  The cruise part.  It 
> was fairly easy to tell where you leveled off.
> 
> Yvon.  The sound of the engine start would be useful for me.  Thank you.
> 
> 
> Yvon Cournoyer wrote:
> > Allo Ernest, I have a video clip of my 13B rotary powered homebuilt 
> > taking off from the local airport. The clip starts from the take-off 
> > point and is 2m 26s duration and 44.3 mb in size.  If it fits your 
> > requirements, I can send it right away. Yvon.
> >
> > ----- Original Message ----- From: "Ernest Christley" 
> > <echristley@nc.rr.com>
> > To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
> > Sent: Friday, November 02, 2007 12:35 PM
> > Subject: [FlyRotary] cockpit sound
> >
> >
> >> Does anyone have recording of the ambient noise of the rotary from 
> >> inside a closed cockpit?
> >>
> >> I want to add the sound to my Xplane model.  I could also use a 
> >> recording of the engine starting.
> >>
> >> -- 
> >> Homepage:  http://www.flyrotary.com/
> >> Archive and UnSub: 
> >> http://mail.lancaironline.net:81/lists/flyrotary/List.html 
> >
> >
> > -- 
> > Homepage:  http://www.flyrotary.com/
> > Archive and UnSub:   
> > http://mail.lancaironline.net:81/lists/flyrotary/List.html
> >
> 
> 
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html


-- 
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://www.roblinphoto.com/shop/