Mailing List flyrotary@lancaironline.net Message #39708
From: Ed Anderson <eanderson@carolina.rr.com>
Subject: Re: [FlyRotary] Question on Heater Core Return
Date: Fri, 5 Oct 2007 08:29:53 -0400
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
 Message Header

Undecoded Message
Return should be returned to the low pressure side (Inlet) of the coolant pump, so lower pressure there will help draw the coolant through the heater hoses.
 
Ed
----- Original Message -----
Sent: Thursday, October 04, 2007 11:05 PM
Subject: [FlyRotary] Question on Heater Core Return

My 13B only has a 3/4 inch. NPT bung on the inlet and outlet of the water pump so I'm looking for suggestions on where the best place might be to connect the 5/8 inch heater hose that will return from the heater core.
 
Thanks for any ideas...
 
Doug Lomheim
RV-9A, OK City, OK FWF, etc.
 
 
             



See what's new at AOL.com and Make AOL Your Homepage.

--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html
Image
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster