----- Original Message -----

From: George Lendich

To: Rotary motors in aircraft

Sent: Thursday, July 19, 2007 5:45 PM

Subject: [FlyRotary] Re: Carbs

Richard,

What size P-port are you running in the 12A?

George ( down under)

Hi Lynn,

 

I am running my 12A single with gear box and Prop now.

The carb is a 36mm Mikuni. It does flow 5gph fuel at 5000rpm. Havent done any tuning so far. The reason for using this carb is, I had it. I did run WOT the other day, and at around 5500rpm, the mixture went totally out of wack, lean. Already installed a bigger main jet, no run yet.

I could probabely use your info about a flow bench somewhere down the road.

 

Thanks

 

Richard.