Hi Bully,

Unused sensor inputs should be grounded.  I think airframe ground would
be OK, or you can tap into a line from pin 9, 12, 13, or 25 on P2.  If
one of them is unused, you can solder a jumper from the O2 sensor line
(pin 8) to it.

Bob W.

On Thu, 10 May 2007 20:58:55 -0500
<atlasyts@bellsouth.net> wrote:

I'm not using the O2 sensor lead for the EM2. I wander if I can just cut it off at the plug, or have to ground it? I have installed a wide band O2 sensor with it's own processor and display.
Buly

-- N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://www.roblinphoto.com/shop/

--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html