Tracy,

 

what was this talk (some time ago on the other list, .....I get the essential stuff, but delayed...) that your EC2 is not compatible with a C/S prop?

That it does not work on a dyno?

Would you please care to clear up the "smoke"....

 

How far is your EC2 from a true FADEC (or whatever Mistral is calling there system)

You are already trying the Fly-by-wire throttle - is it a lot more for a FADEC?

 

Single power-lever (maybe the prop-rpm separate or even that controlled by single lever), no mixture adjustment needed...

 

Best Regards,

 

TJ

 

On 5/10/07, Al Gietzen <ALVentures@cox.net> wrote:

On Thu, 10 May 2007 09:31:30 -0800
"Al Gietzen" <ALVentures@cox.net > wrote:


>
> BTW; preliminary results indicate that the issue I've had with the
> spontaneous changes of settings has been resolved.

> Al
>
<snip>

What was causing it?

Bob W.
--------------------

Don't know exactly.  Added additional filtering on the circuit board :

1000pf capacitors were added to:

All fuel injector signals
All ignition control signals
RX input
TX output

47uf, 16V tantalum were added to each processor

Pin 8 of connector is now grounded.
Pin 28 of connector is now grounded.

Al


--
Homepage:   http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html