|
|
The plane run much better on computer B.
Is this something new; or has it always been that way?
That's something I noticed yesterday. I was getting severe lean suddenly at high RPM. Switching to computer B cleared it and I got higher top rpm and lower EGT.
I was seeing EGT's around 1750 at full power. Is that normal?
Buly
My EGT probes are placed the same as yours, and I typically see about 1650F. But it depends on mixture setting; mine is normally rich of peak for WOT (mixture monitor bar mid-scale or above). If you’re having difficulty with the EC2 settings, you may have been running lean.
Al
It's obvious I have to re-do the tuning on computer A. Thanks Al
Buly
|
|