Received-SPF: none
 receiver=logan.com; client-ip=64.202.165.181; envelope-from=nospam@avamail.net
Message-ID: <453C8E66.1030901@avamail.net>
Date: Mon, 23 Oct 2006 11:41:58 +0200
From: Donald Willard Garrett <nospam@avamail.net>
Reply-To:  flyrotarynospam@avamail.net
User-Agent: Thunderbird 1.5.0.7 (Windows/20060909)
MIME-Version: 1.0
To:  flyrotary@lancaironline.net
Subject: Re: [FlyRotary] Flywheel nut
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit

Years ago, I stayed up watching one of those infomercial shows, and made 
what turned out to be my favorite tool purchase ever. When they got 
stolen from my car, I bought the deluxe set, and like it even better. 
Rather than turning the corners of the nut, they cam onto the face, 
meaning:

   1. each socket / wrench does both metric and the nearest fraction of
      an inch
   2. you can't strip a nut or bolt head with them
   3. you can turn a nut or bolt that's stripped almost round

Additionally, I've used (abused) them with cheater bars, and am 
confident that anything I can get a socket on I can either crack or 
twist off the bolt (like the head bolt on a Chevy 454--oops). I've 
pulled engines etc. foreign and domestic, and handed them over on 
numerous occasions to jobsite crews when regular hex wrenches fail (tool 
sacrifice--watched guys hang from them and hit them with hammers) with 
zero failures.

There you have it, of all the tools I own, the only ones I'd ever do a 
commercial for!

http://www.mitools.com/

Donald Garrett        flyrotarynospam@avamail.net

On 06.10.23 07:44:17, Thomas Phy (thomphy@msn.com) wrote:
 > Hi all,
 > Does anyone know the size socket needed to remove the flywheel nut on a
 > Renesis? 2 1/8 " measures tight. And where has anyone bought said 
socket?
 > Thomas Phy
 > Renesis finally in shop!