Received-SPF: none
 receiver=logan.com; client-ip=68.230.241.34; envelope-from=alventures@cox.net
From: "Al Gietzen" <ALVentures@cox.net>
To: "'Rotary motors in aircraft'" <flyrotary@lancaironline.net>
Subject: RE: [FlyRotary] It runs!
Date: Sun, 10 Sep 2006 22:58:43 -0700
Message-ID: <000001c6d567$56b184a0$6400a8c0@BigAl>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Importance: Normal
In-Reply-To: <list-1373227@logan.com>

Bob;
Great that you got the engine running.
You may have some misconnection, stuck injectors, or whatever, but also
there is no reason to believe that the mixture is correct.  Are you =
getting
the O2 sensor hot enough for a reading, and are you seeing a mixture
readout?

I'd say get a prop load on there, and adjust mixture, get some readout =
of
what's going on.  I don't think you necessarily want the thing spinning =
over
6000 on first startup anyway.

Good luck.  I'm sure you'll figure it out.

Al

-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Bob Darrah
Sent: Sunday, September 10, 2006 5:51 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] It runs!

Finally started my 20b on the test stand.  It runs, but not very good.=20
Using Tracy's ECU and monitor, and a long (about 10 foot) umbilical cord =

from the firewall, it will idle about 900 rpm, starts right up, but can=20
hardly get 6000 RPM without prop.  The timing strobe shows about 35 =
degrees=20
BTDC.  Seems to smoke a lot.

Possible causes:
     Too much oil in gas-just dumped in a couple gulups of oil in an=20
estamated 2 gallons of gas.
     Embilical cord too long.
     Intake manafold-homemade log type about 4 inch dia, with short =
(5in)=20
runners, tapering top to botom from log diameter to intake port size, =
but=20
constant width, the same as the ports.  They match the ports well.  I am =
in=20
a good position to put the original intake back on to see if that will =
help,

(last resort).
     Exhaust pipe attaches to where the turbo will go and is a used auto =

exhaust system, about 18 feet long including muffler.
     Something else, anyone got any good ideas?

I would like to get it to run better before I hang it in my Seawind.=20
Hanging it in that airplane is no easy task.


Bob Darrah=20


--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/