Received-SPF: pass
 receiver=logan.com; client-ip=205.152.59.66; envelope-from=atlasyts@bellsouth.net
From: <atlasyts@bellsouth.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: Sensors
Date: Fri, 25 Aug 2006 10:17:27 -0400
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Message-Id: <20060825141727.FXLC4218.ibm61aec.bellsouth.net@mail.bellsouth.net>

Bob, if you are not comfortable landing at Shady Bend, Cross City is the alternate. I want to take mine, but can not find yet somebody to give me a dual for couple of hours?
Buly
> 
> From: Bob White <rlwhite@comcast.net>
> Date: 2006/08/25 Fri AM 09:13:38 EDT
> To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
> Subject: [FlyRotary] Re: Sensors
> 
> It sounds like a great first long X-country test flight.  I will have
> to see how the test phase goes.  It will have to be near perfect to
> make it and my experience so far is it's not likely.  I'll sure give it
> a try though.
> 
> Bob W.
> 
> On Fri, 25 Aug 2006 08:27:03 -0400
> Bulent Aliev <atlasyts@bellsouth.net> wrote:
> 
> > So, you are coming to Shady bend with the plane this year?
> > Buly
> > On Aug 24, 2006, at 11:12 PM, Bob White wrote:
> > 
> > > Not quite finished, but trying DANG hard.  I have an A&P working on my
> > > condition inspection (I didn't build it) and need to call the DAR.
> > > Maybe soon.  You all will be the second to know. :)
> > >
> > > Bob W.
> > >
> > > On Thu, 24 Aug 2006 22:38:56 -0400
> > > Bulent Aliev <atlasyts@bellsouth.net> wrote:
> > >
> > >> that's because we are all finished with our planes? :)
> > >> Bulent "Buly" Aliev
> > >> FXE Ft lauderdale, FL
> > >> http://tinyurl.com/s5xw8
> > >>
> > >> On Aug 24, 2006, at 10:36 PM, Thomas Phy wrote:
> > >>
> > >>> How long were your emails being collected? Allot of us seem to be
> > >>> either not getting emails, or it's just quiet. It's never been this
> > >>> quiet.
> > >>> TP
> > >>> ----- Original Message -----
> > >>> From: John Downing
> > >>> To: Rotary motors in aircraft
> > >>> Sent: Thursday, August 24, 2006 7:05 PM
> > >>> Subject: [FlyRotary] Sensors
> > >>>
> > >>> Thankyou for the input on the oil temperature sensors.  Some how my
> > >>> e-mail got screwed up and my son talked with a techy tonight for an
> > >>> hour and found my flyrotary mail in a Yahoo account which I didn't
> > >>> know I had, so I had 265 messages from you folks and none in my
> > >>> regular Outlook Express account.  I was glad to see that you folks
> > >>> hadn't dropped off the face of the earth because this is the only
> > >>> source of information I have for the rotary.  Keep up the good
> > >>> work.  JohnD   Hope to go for engine start in about 3 weeks.
> > >>>
> > >>
> > >>
> > >> --
> > >> Homepage:  http://www.flyrotary.com/
> > >> Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/
> > >
> > >
> > > -- 
> > > http://www.bob-white.com
> > > N93BD - Rotary Powered BD-4 (first engine start 1/7/06)
> > > Custom Cables for your rotary installation -
> > > http://www.roblinphoto.com/shop/
> > >
> > > --
> > > Homepage:  http://www.flyrotary.com/
> > > Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/
> > 
> > 
> > --
> > Homepage:  http://www.flyrotary.com/
> > Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/
> 
> 
> -- 
> http://www.bob-white.com
> N93BD - Rotary Powered BD-4 (first engine start 1/7/06)
> Custom Cables for your rotary installation -
> http://www.roblinphoto.com/shop/
> 
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/
>