Mailing List flyrotary@lancaironline.net Message #33331
From: Dennis Haverlah <clouduster@austin.rr.com>
Subject: Re: [FlyRotary] Re: renesis recall?
Date: Wed, 23 Aug 2006 21:58:27 -0500
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
I wonder if the oil injection system in the RX -8 cars was/is injecting too much oil.  I'm running my Renesis with Shon's alternate oil adapter and his manual oil metering adjuster.  At max. oil  setting I used 2 oz. oil while burning less than 1/2 gal. of fuel.  Oil was being spit out of the intake past the throttle body!  I now have the oil injection rate set at about 1/4 inch from the minimum oil injection rate.  It probably is close to 3/4 oz. oil/ gal.  This is the same amount of oil Tracy is mixing with the fuel.  I'm not flying - still ground running the engine while working on the cowl and inlet system.

Dennis H.

Ernest Christley wrote:

Todd Archer wrote:

Dave,
Yeah, that sounds like the one.  This is the part I was paying attention to:


"Mazda has a remanufacturing center in North Carolina that will rebuild faulty engines and return them to service."

Recalls are always a downer for the manufacturer but if there was a flood of
Renesis engines that were pulled...

Todd

  

And there all right here in North Carolina 8*)

-- Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster