Received-SPF: pass
 receiver=logan.com; client-ip=205.152.59.65; envelope-from=atlasyts@bellsouth.net
Mime-Version: 1.0 (Apple Message framework v752.2)
In-Reply-To: <list-1335926@logan.com>
References: <list-1335926@logan.com>
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed
Message-Id: <7AEC7F73-BB30-453E-AD37-4D6E59709075@bellsouth.net>
Content-Transfer-Encoding: 7bit
From: Bulent Aliev <atlasyts@bellsouth.net>
Subject: Re: [FlyRotary] Buly's exhaust pipes
Date: Thu, 17 Aug 2006 16:48:36 -0400
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>

George, if my pipes come loose, there is no way they are coming out.  
Even If used my hands I can not pull them out thru the augmentor.
My exhaust pipes are 12" from the prop. After running it for few  
minutes I checked the blades and they were just warm to the touch?  
Somebody was using thermal tape patches to check what is the highest  
temps on the prop.
John Slade has the same setup CZ with the turbo and the same prop for  
over 50 hours with no problems.
I'll keep an eye on it. Thanks for your concern George.
Bulent "Buly" Aliev
FXE Ft lauderdale, FL
http://tinyurl.com/s5xw8

On Aug 17, 2006, at 4:22 PM, George Graham wrote:

> Buly,
>
> I really like the looks of your new pipes, they are certanly  
> "snarley".
>
> I could not see the safety straps, which will keep the pipes out of  
> the prop
> if they break off the engine.  Cheap and light insurance.
>
> When my exhaust pointed at my prop, it cooked the maple wood,  
> almost turned it into charcoal, I did not have it mixed with  
> augmented cooling air, but those plastic IVO props really scare me.
>
> Best wishes,
>
>
> George Graham
> Mazda Rx7ez N4449E
> Sarasota Florida -SRQ
>
> Do you Yahoo!?
> Next-gen email? Have it all with the all-new Yahoo! Mail Beta.