X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from imf18aec.mail.bellsouth.net ([205.152.59.66] verified) by logan.com (CommuniGate Pro SMTP 5.1c.2) with ESMTP id 1316069 for flyrotary@lancaironline.net; Wed, 09 Aug 2006 21:48:11 -0400 Received-SPF: pass receiver=logan.com; client-ip=205.152.59.66; envelope-from=atlasyts@bellsouth.net Received: from ibm61aec.bellsouth.net ([65.11.43.177]) by imf18aec.mail.bellsouth.net with ESMTP id <20060810014726.KDOW17566.imf18aec.mail.bellsouth.net@ibm61aec.bellsouth.net> for ; Wed, 9 Aug 2006 21:47:26 -0400 Received: from [192.168.0.119] (really [65.11.43.177]) by ibm61aec.bellsouth.net with ESMTP id <20060810014726.EYCQ11609.ibm61aec.bellsouth.net@[192.168.0.119]> for ; Wed, 9 Aug 2006 21:47:26 -0400 Mime-Version: 1.0 (Apple Message framework v752.2) In-Reply-To: References: Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed Message-Id: Content-Transfer-Encoding: 7bit From: Bulent Aliev Subject: Re: [FlyRotary] Re: water temp location Date: Wed, 9 Aug 2006 21:47:24 -0400 To: "Rotary motors in aircraft" X-Mailer: Apple Mail (2.752.2) The gun belongs to my hangar neighbor. He is an electronics engineer (another one. i'm gona puke :)). First he calibrated the gun. Than he pointed it to the area closest to the temp sensor by the oil pressure sensor. The temp reading was same as the EM2 water temp reading. Than he moved to the pump outlet, thin wall 1.5" aluminum tube. the reading was lower. I could not believe it so we did it again. Same results. Bulent "Buly" Aliev FXE Ft lauderdale, FL http://tinyurl.com/s5xw8 On Aug 9, 2006, at 7:53 PM, Joe Ewen wrote: > Buly, > What kind of hand held unit did you use? IR? > Joe > > ----- Original Message ----- From: "Bulent Aliev" > > To: "Rotary motors in aircraft" > Sent: Wednesday, August 09, 2006 2:32 PM > Subject: [FlyRotary] Re: water temp location > > >> I did it with one of the handheld temp meters. Surprisingly the >> water exiting the pump was about 5-10 degree lower temp? Did it >> couple different ways and the results were similar. >> Buly >>> Group, >>> >>> >>> >>> Has anyone measured the water temp difference between the stock >>> (under the oil filter tower) and the water pump outlet. Bill >>> Eslick and I were discussing this a couple of weeks ago. I am >>> measuring water temp going out of the engine, post water pump >>> outlet. Just curious! >>> >>> >>> >>> Thanks, >>> >>> Jason >>> >>> >> -- >> Homepage: http://www.flyrotary.com/ >> Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/ >> > > > -- > Homepage: http://www.flyrotary.com/ > Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/