X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from imf18aec.mail.bellsouth.net ([205.152.59.66] verified) by logan.com (CommuniGate Pro SMTP 5.1c.2) with ESMTP id 1316061 for flyrotary@lancaironline.net; Wed, 09 Aug 2006 21:39:29 -0400 Received-SPF: pass receiver=logan.com; client-ip=205.152.59.66; envelope-from=atlasyts@bellsouth.net Received: from ibm61aec.bellsouth.net ([65.11.43.177]) by imf18aec.mail.bellsouth.net with ESMTP id <20060810013831.JPVO17566.imf18aec.mail.bellsouth.net@ibm61aec.bellsouth.net> for ; Wed, 9 Aug 2006 21:38:31 -0400 Received: from [192.168.0.119] (really [65.11.43.177]) by ibm61aec.bellsouth.net with ESMTP id <20060810013830.EVCA11609.ibm61aec.bellsouth.net@[192.168.0.119]> for ; Wed, 9 Aug 2006 21:38:30 -0400 Mime-Version: 1.0 (Apple Message framework v752.2) In-Reply-To: References: Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed Message-Id: <31521C73-A87C-4F82-83BD-792C3D108918@bellsouth.net> Content-Transfer-Encoding: 7bit From: Bulent Aliev Subject: Re: [FlyRotary] Re: water temp location Date: Wed, 9 Aug 2006 21:38:28 -0400 To: "Rotary motors in aircraft" X-Mailer: Apple Mail (2.752.2) I don't know George? I just report the facts. The water temps are measured when the coolant comes from the block (hottest) and the oil after the cooler (coolest). Don't ask me why :) Bulent "Buly" Aliev On Aug 9, 2006, at 6:23 PM, george lendich wrote: > Buly/ Bill, > I'm confused - any indications, suggestions, ideas why there should > be a > difference. > Perhaps higher pressure after the pump? > I think I would want to know the highest, in engine, coolant and > oil temps. > George (down under) > >> I did it with one of the handheld temp meters. Surprisingly the water >> exiting the pump was about 5-10 degree lower temp? Did it couple >> different ways and the results were similar. >> Buly >> >>> Group, >>> >>> >>> >>> Has anyone measured the water temp difference between the stock >>> (under the oil filter tower) and the water pump outlet. Bill Eslick >>> and I were discussing this a couple of weeks ago. I am measuring >>> water temp going out of the engine, post water pump outlet. Just >>> curious! >>> >>> >>> >>> Thanks, >>> >>> Jason >>> >>> >> >> -- >> Homepage: http://www.flyrotary.com/ >> Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/ > > > -- > Homepage: http://www.flyrotary.com/ > Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/