|
|
Not quite correct. Ernest.
The one for the front cover is AN10-16mm and the one for the rear housing is AN10-18mm. I believe this is the one that also fits 86-92 coolers. Here is the URL from MazdaTrxi with Data
http://www.mazdatrix.com/b6.htm
Ed
----- Original Message ----- From: "Ernest Christley" <echristley@nc.rr.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Friday, August 04, 2006 10:19 AM
Subject: [FlyRotary] oil cooler thread sizes
I need to order a couple of adapters to plumb my oil cooler out to the engine. I've been searching the archives and the RotaryWiki. I believe the fittings on the engine end need to be M18x1.5. Is this correct? Are the ones on the oil cooler the same size?
-- ,|"|"|, Ernest Christley |
----===<{{(oQo)}}>===---- Dyke Delta Builder |
o| d |o http://ernest.isa-geek.org |
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
|
|