|
Question for you glass fellows. Yesterday I
laid up some cloth on the cowl and it didn't harden. I put some heat
on it with the heat lamp and left it over night and nothing. This
morning I put the heat lamp on it and pulled it off, scraped it and ground
the area, wiped it down again with acetone and tried again. The epoxy is
United Resin Corp. Uni-Lam. The shop is hot water heated with pipe in the
floor and this epoxy is supposed to work at room temperature..The ratio by
volume is 1 to 3.8, it has been working ok by using a marked stick in a
soup can, but I'm wondering if this ratio is hyper critical. Any input
would be greatly appreciated. JohnD
|