Tracy and Ed,
    Thanks for the info......I am talking to the producer of a
constant speed prop controller for my "IVO" and he needed to
know how many injector pulses per revolution.....Uses it as a
signal for the power percentage function of his controller....
Like I need to duplicate one of my EM2 functions !!

--
Kelly Troyer
Dyke Delta/13B/RD1C/EC2





 -------------- Original message ----------------------
From: "Ed Anderson" <eanderson@carolina.rr.com>
> Hi Kelly,
>
> I've been over this with Tracy several times and the answer is always "ONE  time
> per rev" {:>).  The reason I ask the question is that for my EFI fuel monitor to
> give the right answer, I have to set a constant for the injectors flow rate that
> is twice the rate flow Mazda claims.  But, if the injectors did pulse twice per
> rev then the stated injector flow rate would suffice.  
>
> However, no matter how many times I ask Tracy,  he stubbornly keeps insisting  
> "only once per rev" {:>)
>
> Ed A
>   ----- Original Message -----
>   From: Tracy Crook
>   To: Rotary motors in aircraft
>   Sent: Sunday, January 22, 2006 2:37 PM
>   Subject: [FlyRotary] Re: Injector pulseing ? Tracy ?
>
>
>   Easy one!  No.
>
>   Tracy
>     ----- Original Message -----
>     From: Kelly Troyer
>     To: Rotary motors in aircraft
>     Sent: Sunday, January 22, 2006 12:57 PM
>     Subject: [FlyRotary] Injector pulseing ? Tracy ?
>
>
>     Tracy,
>         Do I have this correct ? The EC2 batch fires the injectors therefore all
> the injectors (if above
>     stageing MAP) pulse twice per eccentric shaft revolution.........Inquiring
> minds want to know !!
>
>
>     Thanks
>     --
>     Kelly Troyer
>     Dyke Delta/13B/RD1C/EC2