|
[FlyRotary] Re: Soapbox Warning! PSRU
Ratios
No it comes from a C-6 as I
have one apart here and I have Ross gearbox sitting here with a 4.4
ring gear in it but I have not seen a E4OD trans apart so it must be
different than the early standard C-6
Ken
Ummm, 4.4" sounds more
like the C4 transmission offered
in the Falcon, Fairlane, and Mustang lines.
Dale R.
> From: "Tracy Crook" <lors01@msn.com>
> Date: 2006/01/05 Thu AM 09:37:38 EST
> To: "Rotary motors in aircraft"
<flyrotary@lancaironline.net>
> Subject: [FlyRotary] Re: [FlyRotary]Soapbox Warning!
PSRU Ratios
>
> [FlyRotary] Re: [FlyRotary]Soapbox Warning! PSRU RatiosYep, the
custom pilot shaft will solve that problem Ken.
>
> We must be talking about different
transmissions with regard to the ring gear diameter. I've built
over 180 gear drives based on the C6 and E4OD (modernized C6 with
electronic controls) and the ring gear always measures 5 inches on the
2.176 ratio drives. My calipers just can't be that far off.
>
|