Thanks Greg.

> George the RX8 is 320mm as well.
> Greg
>
>
> > Bill,
> > The dish is 2mm deeper and the holes could be redrilled and it looks
like
> > it's 320mm as well! Less mucking around by getting the right one. I will
> > check on an RX8 to confirm your suspicions.
> > George
> >
> > > I have a flexplate that I suspect is an RX-8 unit, but I am not 100%
> sure.
> > >
> > >          Here is a picture.
> > >
> > >          It measures 1.350" from front to back surfaces. The bolt
circle
> > > for the torque converter is about 10.25" (too big).
> > >
> > >          Bill Dube'
> > >
> > >
> > > At 12:33 AM 12/27/2005, you wrote:
> > >
> > > > > Again Thanks Bob,
> > > > >
> > > > > I would suggest you hang on to this one for yourself. The RX-8
> > flexplate
> > > > > won't work. (Ask me how I know.)
> > > >
> > > >Bill
> > > >I'm asking - is it the diameter or the depth or both.
> > > >I remember seeing the RX8 flexplate but can't recall what it looks
like
> > > >exactly - got a photo and dimensions?
> > > >George (down under)
> > > >
> > > >
> > > >
> > > >
> > > >--
> > > >Homepage:  http://www.flyrotary.com/
> > > >Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/
> > >
> >
> >
>
> --------------------------------------------------------------------------
> --
> > ----
> >
> >
> > > --
> > > Homepage:  http://www.flyrotary.com/
> > > Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/
> > >
> >
> >
> >
> > --
> > Homepage:  http://www.flyrotary.com/
> > Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/
> >
> >
>
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/
>