George the RX8 is 320mm as well.
Greg


> Bill,
> The dish is 2mm deeper and the holes could be redrilled and it looks like
> it's 320mm as well! Less mucking around by getting the right one. I will
> check on an RX8 to confirm your suspicions.
> George
>
> > I have a flexplate that I suspect is an RX-8 unit, but I am not 100%
sure.
> >
> >          Here is a picture.
> >
> >          It measures 1.350" from front to back surfaces. The bolt circle
> > for the torque converter is about 10.25" (too big).
> >
> >          Bill Dube'
> >
> >
> > At 12:33 AM 12/27/2005, you wrote:
> >
> > > > Again Thanks Bob,
> > > >
> > > > I would suggest you hang on to this one for yourself. The RX-8
> flexplate
> > > > won't work. (Ask me how I know.)
> > >
> > >Bill
> > >I'm asking - is it the diameter or the depth or both.
> > >I remember seeing the RX8 flexplate but can't recall what it looks like
> > >exactly - got a photo and dimensions?
> > >George (down under)
> > >
> > >
> > >
> > >
> > >--
> > >Homepage:  http://www.flyrotary.com/
> > >Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/
> >
>
>
> --------------------------------------------------------------------------
--
> ----
>
>
> > --
> > Homepage:  http://www.flyrotary.com/
> > Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/
> >
>
>
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/
>
>