Bill,
The dish is 2mm deeper and the holes could be redrilled and it looks like
it's 320mm as well! Less mucking around by getting the right one. I will
check on an RX8 to confirm your suspicions.
George

> I have a flexplate that I suspect is an RX-8 unit, but I am not 100% sure.
>
>          Here is a picture.
>
>          It measures 1.350" from front to back surfaces. The bolt circle
> for the torque converter is about 10.25" (too big).
>
>          Bill Dube'
>
>
> At 12:33 AM 12/27/2005, you wrote:
>
> > > Again Thanks Bob,
> > >
> > > I would suggest you hang on to this one for yourself. The RX-8
flexplate
> > > won't work. (Ask me how I know.)
> >
> >Bill
> >I'm asking - is it the diameter or the depth or both.
> >I remember seeing the RX8 flexplate but can't recall what it looks like
> >exactly - got a photo and dimensions?
> >George (down under)
> >
> >
> >
> >
> >--
> >Homepage:  http://www.flyrotary.com/
> >Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/
>


----------------------------------------------------------------------------
----


> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/
>