Received-SPF: none
 receiver=logan.com; client-ip=207.189.223.49; envelope-from=billdube@killacycle.com
Message-Id: <4.3.1.0.20051226121401.01f6f528@mail.chisp.net>
Date: Mon, 26 Dec 2005 12:19:51 -0700
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
From: "BillDube@killacycle.com" <billdube@killacycle.com>
Subject: Re: [FlyRotary] Re: ANOTHER wrong flexplate.
In-Reply-To: <list-901553@logan.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed

At 02:10 AM 12/26/2005, you wrote:
>Bill,
>Welcome to the real word of experts - you may need to take a photo with you.
>George (down under)

         What photo? I don't even know the dimensions. The only information 
Tracy provided was the range of model years. One would think this would be 
enough information, but apparently it isn't.

         A picture and some dimensions that would help identify the correct 
flexplate would be very helpful.

         Again, anyone want to trade the CORRECT flexplate for a set of LED 
position lights?


> >          I went to the local rotary repair shop and bought (I thought) a
> > 1986 to 1991 flexplate.
> >
> >          When I got it home, the bolt holes all lined up OK, but the
> > flexplate did not have the correct amount of  "dish" to it.
> >
> >          What could be so hard about buying a 1986 to 1991 flexplate? I
> > will soon have a collection of every model flexplate BUT the one I need.
> >
> >
> > Bill Dube <LED@Killacycle.com>
> > http://www.killacycle.com/Lights.htm
> >
> >
> >
> > --
> > Homepage:  http://www.flyrotary.com/
> > Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/
> >
>
>
>
>--
>Homepage:  http://www.flyrotary.com/
>Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/

Bill Dube <LED@Killacycle.com>
http://www.killacycle.com/Lights.htm