X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from imo-d03.mx.aol.com ([205.188.157.35] verified) by logan.com (CommuniGate Pro SMTP 5.0.4) with ESMTP id 892355 for flyrotary@lancaironline.net; Thu, 22 Dec 2005 08:11:37 -0500 Received-SPF: pass receiver=logan.com; client-ip=205.188.157.35; envelope-from=DLOMHEIM@aol.com Received: from DLOMHEIM@aol.com by imo-d03.mx.aol.com (mail_out_v38_r6.3.) id q.a1.6d7da08a (4568) for ; Thu, 22 Dec 2005 08:10:50 -0500 (EST) From: DLOMHEIM@aol.com Message-ID: Date: Thu, 22 Dec 2005 08:10:49 EST Subject: Off Topic "Switch Placements" To: flyrotary@lancaironline.net MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="-----------------------------1135257049" X-Mailer: 9.0 Security Edition for Windows sub 5301 X-Spam-Flag: NO -------------------------------1135257049 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit I am looking for ideas (especially from those who are already flying (Ed Anderson, etc.)) about the placement of my switches / EC2 control head on the instrument panel. My initial plan is to take some 1 inch aluminum angle and place it under my panel on the pilot side and mount my switches to that with the EC2 controller directly above it. My questions are: 1. What order are you running your switches (battery stuff, engine controls, lights, etc,)?? 2. Ergonomically what location makes the most sense for the EC2 control head and EM2 input buttons 3. Would you change any locations now that you have been flying with it for while... Thanks for any inputs... Thanks for any inputs, Doug Lomheim RV-9A -------------------------------1135257049 Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable

I am looking for ideas (especially from those who are already flying (E= d=20 Anderson, etc.)) about the placement of my switches / EC2 control head on th= e=20 instrument panel. My initial plan is to take some 1 inch aluminum=20 angle and place it under my panel on the pilot side and mount my switc= hes=20 to that with the EC2 controller directly above it. My questions=20 are:

1. What order are you running your switches (battery stuff, engin= e=20 controls, lights, etc,)??

2. Ergonomically what location makes the most sense for the EC2=20 control head and EM2 input buttons

3. Would you change any locations now that you have been flying w= ith=20 it for while...

Thanks for any inputs...

Thanks for any inputs,

Doug Lomheim

RV-9A

-------------------------------1135257049--