----- Original Message -----

From: Bulent Aliev

To: Rotary motors in aircraft

Sent: Wednesday, December 21, 2005 4:14 PM

Subject: [FlyRotary] Re: Props

Thanks George. my mistake was that i did not convert it to MPH.

I was also given the formula for cruise speed:

Pitch" x RPM x 60  = MPH

       12 x 5280

Buly

On Dec 21, 2005, at 4:39 PM, george lendich wrote:

Buly,

Looking at the formula given by members on this list, 2 out of 3 were spot

on with Hoverhawk and the third was close.

Examples:

1. Prop Dia x 3.1416x RPM/ 720 - Correct!

2. Prop RPM x Dia x .00436 - Correct ( 3.14/ 720 =.00436)

3. 3.14 x 64 {given prop dia} ( 5500/2.17 {given RPM})= 508346/707 -

slightly incorrect ( as compared to the other 3 examples, which include

Hoverhawk)

i.e 3.14/ 707 = .004809 whereas all the others are 3.14/ 720 = .00436.

Now that I have that sorted - can someone tell me how to calculate pitch,

easily!!

George ( down under)

Thanks Perry. This makes me feel much better. Looks like the formulas

given to me were not good.

Buly

On Dec 19, 2005, at 2:00 PM, Perry Casson wrote:

I think your math is off a bit - Here's a online calculator http://

www.hoverhawk.com/propspd.html

I think 6900 puts a 72" prop close to  mach 0.9 but I've never ran

mine above 6500

Perry Casson

--

Homepage:  http://www.flyrotary.com/

Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/

Buly

atlasyts@bellsouth.net

--

Homepage:  http://www.flyrotary.com/

Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/

--

Homepage:  http://www.flyrotary.com/

Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/

Bulent "Buly" Aliev

http://home.bellsouth.net/p/s/community.dll?ep=16&ext=1&groupid=164323&ck=

---

No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.371 / Virus Database: 267.14.2/208 - Release Date: 12/20/2005