Mailing List flyrotary@lancaironline.net Message #28618
From: Greg@itmack <greg@itmack.com>
Subject: Re: [FlyRotary] Fuel filter selection
Date: Wed, 21 Dec 2005 08:10:13 +1000
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Probably a dumb question but do the AN fittings sold by the auto suppliers
such as Earl's have the same flare angle as the aviation fittings sold at
Spruce etc?

Greg




> It's time to select a fuel filter.  I know it's a little oversized, but
> I'm running 3/8" fuel lines at least to the firewall, just to make sure
> I'll never run into a restriction problem with fuel delivery (at least
> not a restriction that can be attributed to undersized lines).
>
> I'm trying to source a part for filters right now, but I'm not sure what
> constitutes good numbers.  The Earl's filter I'm looking at says that it
> traps down to 85microns and is good for 4 to 5gpm.  That would translate
> to 300gph?  Does it strain well enough to act as the primary filter?
>
>
http://store.summitracing.com/default.asp?target=partdetail.asp&autofilter=1
&part=EAR%2D230206ERL&N=115&autoview=sku
>
> --
> This is by far the hardest lesson about freedom. It goes against
> instinct, and morality, to just sit back and watch people make
> mistakes. We want to help them, which means control them and their
> decisions, but in doing so we actually hurt them (and ourselves)."
>
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/
>
>

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster