|
|
Hi John;
I finally made it out to the airport yesterday and got a couple of pics for
you. As you can see in the pic the rear spinner bulkhead doesn't do allot
other than to hold the back pieces of the prop blade cut-outs. Unfortunately
it needs to be cut out this way in order to allow the brush holder to fit in
place. The prop motor fits tightly to the front of the spinner and the front
bulkhead is still in place so it still is quite securely mounted.
Please ignore the embarrassing rust that has formed on the prop flange from
this years neglect :-(
Todd Bartrim
RV9Endurance
13B Turbo Rotary
C-FSTB
http://www3.telus.net/haywire/RV-9/C-FSTB.htm
"The world will always have a place for those that bring hard
work and determination to the things they do."
|
|