George,
If you’re not planning on installing
them in the stock location in the intake ports, then you could use Ford Mustang
injectors. They come in sizes starting at 19lbs/hr on up. I chose
the 42.5 lb/hr units as they flow about the same as the 460cc n/a Mazda
units. I ran them at low power for a couple of hours, but I ended up
using the Mazda injectors after all due to other design reasons. They’re
readily available for a pretty reasonable price.
Mark S.
From: Rotary motors in
aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of George Lendich
Sent: Monday, September 19, 2005
4:11 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Injectors
I've established type of injector and capacity of Injectors
for primary and secondary, I established type of coils - thanks to everyone for
their input.
I have established costs and availability of coils, However
I haven't established costs of Injectors - local prices are a bit over the top,
does any one have any suggestions as to what price to expect to pay, for
injectors and who supplies what?