wrote: George, I have found that NEW Mazda injectors are quite expensive. I've seen a single injector priced at $235.00 USD. You can find remanufactured injectors for around $100.00. One of the reasons to consider non-Mazda injectors - although if you are going to stick injectors into the primary injector holes in the block, are sort of stuck with Mazda (or similar). I have found that the junk-yards that specialize in Mazda parts generally have them at reasonable prices. Say - $25.00 each, you might get a few and then pay another $25.00 each to have the them cleaned and tested. All of my injectors have come from junked engines. Ed A ----- Original Message ----- From: George Lendich To: Rotary motors in aircraft Sent: Monday, September 19, 2005 5:11 AM Subject: [FlyRotary] Injectors To all , I've established type of injector and capacity of Injectors for primary and secondary, I established type of coils - thanks to everyone for their input. I have established costs and availability of coils, However I haven't established costs of Injectors - local prices are a bit over the top, does any one have any suggestions as to what price to expect to pay, for injectors and who supplies what? George (down under) --0-1463838052-1127134911=:95021 Content-Type: text/html; charset=iso-8859-1 Content-Transfer-Encoding: 8bit

The following link is for Mazda injectors re-manufactured by Beck-Arnley,

$72 each available at your local NAPA store, or online:

http://www.napaonline.com/cgi-bin/ncommerce3/ExecMacro/NAPAonline/search_results_product_detail.d2w/report?prrfnbr=15521922&prmenbr=5806&usrcommgrpid=71970451

These are what I am running in my engine.

Jim
Ed Anderson <eanderson@carolina.rr.com> wrote:

George,

I have found that NEW Mazda injectors are quite expensive. I've seen a single injector priced at $235.00 USD. You can find remanufactured injectors for around $100.00. One of the reasons to consider non-Mazda injectors - although if you are going to stick injectors into the primary injector holes in the block, are sort of stuck with Mazda (or similar).

I have found that the junk-yards that specialize in Mazda parts generally have them at reasonable prices. Say - $25.00 each, you might get a few and then pay another $25.00 each to have the them cleaned and tested. All of my injectors have come from junked engines.

Ed A

----- Original Message -----

From: George Lendich

To: Rotary motors in aircraft

Sent: Monday, September 19, 2005 5:11 AM

Subject: [FlyRotary] Injectors

To all ,

I've established type of injector and capacity of Injectors for primary and secondary, I established type of coils - thanks to everyone for their input.

I have established costs and availability of coils, However I haven't established costs of Injectors - local prices are a bit over the top, does any one have any suggestions as to what price to expect to pay, for injectors and who supplies what?

George (down under)

--0-1463838052-1127134911=:95021--